|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
APL5525/5526 Dual Channel 500mA Regulator + Reset IC Features * * Low Quiescent Current : 130A (No load) Low Dropout Voltage : VDROP1=550mV@500mA VDROP2=630mV@500mA Fixed Output Voltage : VOUT1=3.3V/500mA VOUT2=2.5V/500mA Stable with 4.7F Output Capacitor Stable with Aluminum, Tantalum or Ceramic Capacitors Reverse Current Protection No Protection Diodes Needed Built in Thermal Protection Fast Transient Response Short Setting Time SOP-8, SOP-8-P with Thermal Pad Packages Adjustment-free Reset Detection Voltage : 3.9V or 4.2V typ Easy to Set Delay Time from Voltage Detection to Reset Release General Description The APL5525/6 is a dual-channel regulator with reset function (specific voltage monitoring), and internal delay circuit, set to detect 3.9V or 4.2V. Maximum input voltage is 6V, output1 and output2 deliver up to 500mA. VOUT1 typical dropout voltage is 550mV at 500mA loading and VOUT2 typical dropout voltage is 630mV at 500mA loading. Design with an internal Pchannel MOSFET pass transistor, the APL5525/6 maintains a low supply current. Other features include, thermal-shutdown protection, current limit protection to ensure specified output current. The APL5525/6 come in miniature SOP-8 and SOP-8-P packages. * * * * * * * * * * * Pin Configuration SOP-8 Top View Cd RESET V DET 1 2 3 4 8 7 6 5 CONT GND V V O UT2 O UT1 Cd RESET V DET 1 2 3 4 8 7 6 5 CONT GND V V O UT2 O UT1 V IN V IN Applications Cd 1 2 3 4 8 7 6 5 SOP-8-P Top View CONT GND V V O UT2 O UT1 Cd RESET V DET 1 2 3 4 8 7 6 5 CONT GND V V O UT2 O UT1 * CD-ROM drive. RESET V DET V IN V IN APL5525 APL5526 = Thermal Pad (connected to GND plane for better heat dissipation) ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. A.3 - Jul., 2003 1 www.anpec.com.tw APL5525/5526 Ordering and Marking Information APL5525/6 Lead Free Code Handling Code Tem p. Range Package Code Detection Voltage Package Code K : SO P-8 KA : SO P-8-P Tem p. Range C : 0 to 70 C Handling Code TR : Tape & Reel Detection Voltage : A : 3.9V B : 4.2V Lead Free Code L : Lead Free Device Blank : O rginal Device X - Detection Voltage XXXXX - Date Code APL5525/6 K / KA : APL5525/6X XXXXX Pin Description No. 1 2 3 4 5 6 7 8 PIN Name Cd RESET RESET VDET VIN VOUT1 VOUT2 GND CONT O O I I O O I I/O Description Delay time capacitor pin, RESET pin output delay time can be set by the capacitor connected to the Cd pin. tPLH = 130000C, tPLH : transmission delay time (s), C:capacitor value (F) Input voltage detection output pin , low = VDET Absolute Maximum Ratings S ym b o l V IN , V O U T CONT V DET R T H ,JA P aram eter Input Voltage or O ut Voltage V O U T 1 S hutdow n C ontrol P in R E S E T P in S upply Voltage T herm al R esistance - Junction to A m bient S O P -8 S O P -8-P P ow er D issipation O perating Junction Tem perature C ontrol S ection P ow er Transistor T STG TL S torage Tem perature R ange Lead Tem perature (S oldering, 10 second) 2 R atin g 6 6 6 160 80 Internally Lim ited 0 to 125 0 to 150 -65 to +150 260 U n it V V V C /W W C C C www.anpec.com.tw PD TJ Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 APL5525/5526 Electrical Characteristics Unless otherwise noted these specifications apply over full temperature , VIN=5V, CIN=1F,COUT1=4.7F, COUT2=4.7F, CONT=VIN, TJ=0 to 125C . Typical values refer to TJ=25C . Symbol VIN IQ Parameter Input Voltage Quiescent Current Shutdown Supply Current IOUT1 =0mA, IOUT2 =0mA CONT = low IOUT2=0mA, VIN =6.0V 1.6 -0.3 3.234 VOUT+0.5V< VIN<6.0V, IOUT=10mA VIN =5V, 0mA< IOUT < IMAX 500 4 25 550 45 50 125 10 100 4.7 0.01 VIN=5V VIN=5V 2.45 500 2.5 950 1 2.55 6 60 650 130 100 0.1 VIN+0.3 0.4 40 3.366 Test Conditions APL5525/6 Min. Typ. Max. 6 Unit V A A A V A V mA mA mV mV mV dB C C ppm/C F Ohm V mA mA Shutdown Input Bias VCONT =VIN current High Threshold Voltage VCONT Low Threshold Voltage ICCQ VDET Input Current VDET =5V Regulator1 ICONT VOUT1 Output Voltage ILIMIT IOUT Circuit Current Limit Load Current VIN=5V VIN=5V 20 3.3 950 REGLINE Line Regulation REGLOAD Load Regulation (Note) Dropout Voltage (VOUT(Nominal)=3.3V IOUT =500mA Version) F1kHz, 1Vpp at IOUT=50mA PSRR Ripple Rejection Over Temperature Shutdown OTS Over Temperature Hysteresis Shutdown Hysteresis VDROP TC Output Voltage Temperature Coefficient Output Capacitor ESR Ta= -20 ~ 80c COUT Regulator2 VOUT2 Output Voltage ILIMIT IOUT Circuit Current Limit Load Current Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 3 www.anpec.com.tw APL5525/5526 Electrical Characteristics (Cont.) Unless otherwise noted these specifications apply over full temperature , VIN=5V, CIN=1F,COUT1=4.7F, COUT2=4.7F, CONT=VIN, TJ=0 to 125C . Typical values refer to TJ=25C . Symbol Parameter Test Conditions VOUT+0.5V< VIN<6.0V, IOUT=10mA VIN =5V, 0mA< IOUT < IMAX APL5525/6 Min. Typ. 4 30 630 45 52 125 10 100 0.01 VDET=H!L (APL5525/6A) VDET=H!L (APL5525/6B) Ta = -20~+80C VDET = H!L VDET = 3.9V, RL = 4.7k VDET = 5V VDET =3.9V, VRESET = 0.4V VDET = 3.9V, VRESET = 0.4V Ta = -20~+80C 130 3.9 4.2 100 180 12 0.5 30 25 42 8 13 4 0.95 90 18 90 1.25 230 60 1 4.7 1 Max. 6 50 750 Unit mV mV mV dB C C ppm/C F Ohm REGLINE Line Regulation REGLOAD Load Regulation (Note) Dropout Voltage VDROP (VOUT(Nominal)=2.5V IOUT =500mA Version) F1kHz, 1Vpp at IOUT=50mA PSRR Ripple Rejection Over Temperature Shutdown OTS Over Temperature Hysteresis Shutdown Hysteresis TC COUT Output Voltage Temperature Coefficient Output Capacitor ESR Ta= -20 ~ 80c RESET / RESET VS Detection Voltage V ppm/C mV mV A mA mA s ms s V Vs Temperature VS/T Coefficient VS VOL IOH IOL1 IOL2 tPLH tPLH1 tPHL VOPL Hysteresis Voltage Low-level Output Voltage Output Leakage Current Output Current1 Output Current2 25 20 "H" Transmission Delay Cd = 0F Time Reset Delay Time VDET = 3.7V!5V, Cd = 0.1F "L" Transmission Delay Cd = 0F Time Threshold Operating Voltage VRESET = 0.4V Note : Dropout voltage definition : VIN- VOUT when VOUT is 2% below the value of VOUT for VIN=5V Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 4 www.anpec.com.tw APL5525/5526 Application Circuit 3.3V VIN 1F 4.7k RESET Cd GND VOUT2 CONT RL VOUT1 COUT1 4.7F (ceramic) 2.5V COUT2 4.7F (ceramic) VDET APL5525/6 0.1F Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 5 www.anpec.com.tw APL5525/5526 Timing Chart APL5525 APL5526 VIN. VDET 5V Vs Vs VIN. VDET 5V Vs Vs RESET 5V tPLH + tPLH1 RESET 5V tPLH + tPLH1 0V CONT H 0V CONT H L VOUT1 5V L VOUT1 5V 0V VOUT2 5V 0V VOUT2 5V 0V 0V Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 6 www.anpec.com.tw APL5525/5526 Typical Characteristics Quiescent Current vs. Input Voltage 160 IOUT1=IOUT2=0mA 140 Quiescent Current vs. Output Current 600 500 400 300 200 100 0 VIN = 5V VOUT1 VOUT2 Quiescent Current (A) 120 100 80 60 40 20 0 0 1 2 3 4 5 6 Quiescent Current (A) 0 100 200 300 400 500 Input Voltage (V) Output Current (mA) Output Voltage vs. Input Voltage 3.5 3.310 Output Voltage vs. Temperature 2.508 2.506 2.504 IOUT1 = IOUT2 = 0mA 3 VOUT1 3.305 3.300 VOUT1 Output Voltage (V) 2.5 VOUT1 (V) 2 1.5 1 0.5 0 0 1 2 3 VOUT2 VOUT2 3.295 3.290 3.285 3.280 2.500 2.498 2.496 2.494 2.492 -25 0 25 50 75 100 125 4 5 Input Voltage (V) Temperature (+) Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 7 www.anpec.com.tw VOUT2 (V) 2.502 APL5525/5526 Typical Characteristics Dropout Voltage vs. Output Current 700 600 PSRR vs. Frequency +0 VIN = 5V -10 IOUT1 = IOUT2 = 50mA Dropout Voltage (mV) 500 400 300 200 100 0 0 100 200 300 400 500 -20 VOUT2 VOUT1 PSRR (dB) -30 -40 -50 -60 -70 -80 10 VOUT1 VOUT2 100 1k 10k 100k Output Current (mA) Frequency (Hz) Load-Transient Response Load-Transient Response VOUT1(200mV/div) VOUT2(200mV/div) IOUT1=1mA ~ 500mA COUT1=4.7uF IOUT2=1mA ~ 500mA COUT2=4.7uF Time (0.1m/div) Time(0.1m/div) Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 8 www.anpec.com.tw APL5525/5526 Typical Characteristics Line-Transient Response Shutdown Response RLOAD = 100 VIN = 4.5 ~ 5.5V VOUT1 (2v/div) VOUT1(20mV/div) IOUT1=10mA COUT1=4.7uF VOUT2 VOUT2(20mV/div) IOUT2=10mA COUT2=4.7uF CONT(2v/div) Time(20s/div) Time (1ms/div) Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 9 www.anpec.com.tw APL5525/5526 Packaging Information SOP-8 pin ( Reference JEDEC Registration MS-012) E H e1 D e2 A1 A 1 L 0.004max. Dim A A1 D E H L e1 e2 1 M illimete rs M in . 1.35 0.10 4.80 3.80 5.80 0.40 0.33 1.27BSC 8 M ax. 1.75 0.25 5.00 4.00 6.20 1.27 0.51 M in. 0.053 0.004 0.189 0.150 0.228 0.016 0.013 0.015X45 Inches M ax. 0.069 0.010 0.197 0.157 0.244 0.050 0.020 0.50BSC 8 Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 10 www.anpec.com.tw APL5525/5526 Packaging Information SOP-8-P pin ( Reference JEDEC Registration MS-012) E1 D1 E H e1 D e2 A1 A 1 L 0.004max. M illimeter s M in . 1.3 5 0.1 0 4.8 0 3.0 0R EF 3.8 0 2.6 0R EF 5.8 0 0.4 0 0.3 3 1.2 7BS C 8 6.2 0 1.2 7 0.5 1 4.0 0 M ax. 1.7 5 0.2 5 5.0 0 0.015X45 Dim A A1 D D1 E E1 H L e1 e2 1 Inc hes M in . 0.0 53 0.0 04 0.1 89 0.11 8REF 0.1 50 0.1 02R EF 0.2 28 0.0 16 0.0 13 0.5 0BS C 8 0.2 44 0.0 50 0.0 20 0.1 57 M ax. 0.0 69 0.0 10 0.1 97 Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 11 www.anpec.com.tw APL5525/5526 Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb) Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition (IR/Convection or VPR Reflow) Reference JEDEC Standard J-STD-020A APRIL 1999 temperature Peak temperature 183C Pre-heat temperature Time Classification Reflow Profiles Convection or IR/ Convection Average ramp-up rate(183C to Peak) 3C/second max. 120 seconds max Preheat temperature 125 25C) 60 - 150 seconds Temperature maintained above 183C Time within 5C of actual peak temperature 10 -20 seconds Peak temperature range 220 +5/-0C or 235 +5/-0C Ramp-down rate 6 C /second max. 6 minutes max. Time 25C to peak temperature VPR 10 C /second max. 60 seconds 215-219C or 235 +5/-0C 10 C /second max. Package Reflow Conditions pkg. thickness 2.5mm and all bgas Convection 220 +5/-0 C VPR 215-219 C IR/Convection 220 +5/-0 C pkg. thickness < 2.5mm and pkg. volume 350 mm pkg. thickness < 2.5mm and pkg. volume < 350mm Convection 235 +5/-0 C VPR 235 +5/-0 C IR/Convection 235 +5/-0 C www.anpec.com.tw Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 12 APL5525/5526 Reliability test program Test item SOLDERABILITY HOLT PCT TST ESD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B, A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245C , 5 SEC 1000 Hrs Bias @ 125 C 168 Hrs, 100 % RH , 121C -65C ~ 150C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms , Itr > 100mA Carrier Tape t P P1 D Po E F W Bo Ao Ko D1 T2 J C A B T1 Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 13 www.anpec.com.tw APL5525/5526 Reel Dimensions Application A 330 1 SOP- 8/-P F 5.5 1 B 62 +1.5 D C 12.75+ 0.15 D1 J 2 0.5 Po T1 12.4 0.2 P1 2.0 0.1 T2 2 0.2 Ao 6.4 0.1 W 12 0. 3 Bo 5.2 0. 1 P 8 0.1 Ko E 1.750.1 t 1.55 +0.1 1.55+ 0.25 4.0 0.1 2.1 0.1 0.30.013 Cover Tape Dimensions Application SOP- 8/-P Carrier Width 12 Cover Tape Width 9.3 Devices Per Reel 2500 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright ANPEC Electronics Corp. Rev. A.3 - Ju1., 2003 14 www.anpec.com.tw |
Price & Availability of APL5525 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |